- Lay the furled Gennaker on the deck (fig. 1). Install the furling line round the drum (fig. 2). See below for details;
- Fasten the upper thimble onto the swivel protected by the a neoprene cover, supplied in the kit (fig.3). Attach the drum onto the chain plate or bowsprit (fig. 4). Adjust the bowsprit and secure with a bridle
- Check that the halyard is clear, hoist the sail (fig 5), tighten and control the sail sheet (fig 6). Ready!
- Ratchet system : From a locked position, release the ratchet by operating the drum by rotating (furling in) half a turn. Once released the sail will unfurl easily
Note: always keep the reefing line under tension and fit a line stopper. Lower the furled sail after use.