The FX+ furler, fitted with the Fast thimble, allows to furl in the asymmetric Spinnakers from the cockpit by pulling the bottom furling line. The anti-twist rope rotates up to the top and then transmits the rotation from the head to the tack of sail. And it is possible to use your existing asymmetric Spinnaker.
⊕ FAST thimble : with the FX+ furler, this FAST system allows you to use your FX+ from Gennaker to asymmetric Spinnaker in a two clicks
⊕ Possibility to use your existing asymmetric Spinnaker
⊕ Easy and regular furling from top to bottom (see picture below).
⊕ A.T. rope captive inside the luff tape
⊕ Same FX+ features : tested mechanisms, strong and clever, and quick release pin
⊕ Maintenance free : high protection of the mechanisms
– Rotating tack fitting with Torlon®
– Fast Thimble perfectly designed to fit the FX+ drum jaws
– Safe tack attachment : resistant (stainless steel), smooth edge for a secure lashing (Tack attaching rope included)
Two options are available to adjust the tack of your asymmetric Spinnaker:
– SSH solid sheave;
– Soft converter
|Fast FX+ Models||FastFX+|
|6 < 8,5 m|
20 < 28'
|8,5 < 12 m|
28 < 40'
|12 < 14 m|
40 < 45'
|13 < 16 m|
42 < 55'
|16 < 20 m|
55 < 70'
|max.Asym.Spi Area m2*||40 m2||80 m2||150 m2||240 m2||340 m2||CONTACT US|
|Safe Working Load** (tons)||0,9 T||1,5 T||2,5 T||4,5 T||7 T|
|REF. Fast FX+ pack||43220700940||43220701540||43220702540||43220704540||43220707040|
|Fast click pack|
(+ ratchet system)
|* for information only ** The S.W.L. is the max. safe working load over which distorsions of the furler can appear. This load is approx. 50% of the breaking load (depending on models)|